Buck 110 Custom Rebuild Project

Skullworks · 07-15-2009, 08:51 AM

Okay. I picked up a worn out 110...cheap...and you can see why!

Here is the project knife.

I posted a question about how hard was it to take apart. This one was easy as could be. Maybe because of the condition...no idea. A hammer, vise and a punch and it's apart. Had to sand the heads off the handle pins to get them loose. The lock up was a little loose so that might be a problem.

I plan on using a twist damascus blade replacement and I'm not sure about the scales yet. I'm think maybe some mammoth tooth.
I'll up date this as I progress!

jb4570 · 07-15-2009, 12:26 PM

Hi Skullworks,

Keep the photo's of your project comming. Sounds like it will be a very nice custom

jb4570

Lugs · 07-19-2009, 07:11 PM

ya baby! im liking it already. anxious to see your progress.

muskrat man · 07-19-2009, 10:55 PM

Skull, looking good so far. Yes generally they are fairly simple to dsassemble with a hammer and punch and plenty of force

Skullworks · 07-27-2009, 07:43 AM

Well I got it cleaned up a bit. The blades is in...damascus twist pattern in 1095 $ 15N20 nickel carbon. I think I'm going with these scales which are a wicked fire like mammoth tooth.

muskrat man · 07-28-2009, 04:49 PM

looking good, awsome tooth too

bLuEnOtE · 07-30-2009, 01:03 PM

That's gonna be purdy..

maxcutter03 · 08-27-2009, 01:39 PM

hurry and finish, I want to see the finished action.

wayne_l · 04-13-2010, 04:22 AM

any finished pics of this knife since it was brought back from the dead ?

Skullworks · 04-13-2010, 12:11 PM

Quote:

Originally Posted by wayne_l

any finished pics of this knife since it was brought back from the dead ?

I had to put it on a back burner but I need to get with it again for sure.

rio · 04-19-2010, 06:47 AM

welcome to ramanon marry

rio · 04-19-2010, 06:48 AM

can't wait to see it done skulls

Johnny West · 04-20-2010, 09:42 AM

Quote:

Originally Posted by Skullworks

Well I got it cleaned up a bit. The blades is in...damascus twist pattern in 1095 $ 15N20 nickel carbon. I think I'm going with these scales which are a wicked fire like mammoth tooth.

Skull-: That's a butey of a project. Where did you find the blade? JW

Skullworks · 04-21-2010, 04:56 AM

Quote:

Originally Posted by Johnny West

Skull-: That's a butey of a project. Where did you find the blade? JW

I got the blade from Grand Leavitt of snakeriver knife co on ebay. Great guy with some awesome blades.

seaplane · 05-01-2010, 09:13 PM

I've been looking at possibly trying to do this . I am looking forward to seeing the finnished knife and getting your opinions on re-assembling the 110. It would be great if you could give your opinion on how well the blade fit and what tweaks you had to do to it to get a good fit up!

BSharp · 05-04-2010, 11:39 AM

Looks like it's going to be pretty cool. Can't wait to see the finished version.

williamsmith · 06-01-2010, 07:29 AM

its really Amazing and sounds good to me a lot.

maxcutter03 · 06-09-2010, 11:22 AM

Where's the knife??

Dirk_McStabbins · 07-30-2010, 06:30 AM

Should be a very nice knife.

maxcutter03 · 08-15-2010, 09:50 PM

It's been over a year........Where is the finished knife??

Skullworks · 08-19-2010, 04:57 PM

I know...I know!

rio · 08-19-2010, 05:20 PM

Quote:

Originally Posted by Skullworks

I know...I know!

dude

maxcutter03 · 08-27-2010, 02:59 PM

Quote:

Originally Posted by Skullworks

I know...I know!

Skullworks · 08-28-2010, 07:02 AM

Quote:

Originally Posted by maxcutter03

It's just laying there in a pile of parts.

I've been building requested knives for people....

maxcutter03 · 08-28-2010, 09:01 PM

Tease!!!!!!!!!!

rio · 08-28-2010, 09:12 PM

i request this one them

Skullworks · 08-29-2010, 07:47 AM

Quote:

Originally Posted by rio

i request this one them

LOL! Let me see what I can do!

Skullworks · 08-29-2010, 06:46 PM

Alright. I got jiggy with it today!

Getting the pins compressed and not getting the blade too tight was a bit of a trial and error. Shaped the scales roughly...still a little fine fitting to be done. Gonna do just epoxy to hold the scales on. A little relief in the liner to allow for the spring pivot pin. Gonna epoxy it up and finish her up.

Skullworks · 08-30-2010, 05:05 AM

ttt

Dirk_McStabbins · 08-30-2010, 08:12 AM

Looking good

Skullworks · 08-30-2010, 06:45 PM

Okay guys! You hound me and then no response???

Skullworks · 09-04-2010, 04:42 PM

Finished!

My final thoughts:

Don't buy a cheap worn out 110 for the project. The locking spring will be worn out and you'll have to buy several to find a good one. Go ahead and buy a better starting knife.
Make sure to keep the spacer/washer from the old blade that goes in the pivot hole of the blade.
Do as much of your finishing and fitting before you reassemble the knife. It saves on getting lots of grit in the action from sanding.
Tough for me to get the correct compression on the pins to make everything tight and fit nice without making the action tough to work. Lots of WD40 helps loosen it up.

Give it a try...sure does create a unique knife!

forgedintime · 09-04-2010, 07:35 PM

Beautiful finished knife. I bet it will cut a helluva lot better then the original blade too. Nice work!

Maine1 · 09-04-2010, 11:24 PM

Nice work! looks great.

07-15-2009, 08:51 AM	#1
Skullworks Spammer Royale with cheese Join Date: Feb 2008 Posts: 783	Buck 110 Custom Rebuild Project Okay. I picked up a worn out 110...cheap...and you can see why! Here is the project knife. I posted a question about how hard was it to take apart. This one was easy as could be. Maybe because of the condition...no idea. A hammer, vise and a punch and it's apart. Had to sand the heads off the handle pins to get them loose. The lock up was a little loose so that might be a problem. I plan on using a twist damascus blade replacement and I'm not sure about the scales yet. I'm think maybe some mammoth tooth. I'll up date this as I progress!

07-15-2009, 12:26 PM	#2
jb4570 Smart! Join Date: May 2006 Location: Sunny CA Posts: 39	Re: Buck 110 Custom Rebuild Project Hi Skullworks, Keep the photo's of your project comming. Sounds like it will be a very nice custom jb4570 __________________ Ride hard, shoot straight and cut like a surgeon

07-19-2009, 07:11 PM	#3
Lugs Neophyte Join Date: Jul 2009 Posts: 15	Re: Buck 110 Custom Rebuild Project ya baby! im liking it already. anxious to see your progress. __________________ "In life we all have an unspeakable secret, an irreversible regret, an unreachable dream and an unforgettable love."--Diego Marchi

07-19-2009, 10:55 PM	#4
muskrat man filemaster Join Date: Oct 2006 Location: Ohio Posts: 1,305	Re: Buck 110 Custom Rebuild Project Skull, looking good so far. Yes generally they are fairly simple to dsassemble with a hammer and punch and plenty of force

07-27-2009, 07:43 AM	#5
Skullworks Spammer Royale with cheese Join Date: Feb 2008 Posts: 783	Re: Buck 110 Custom Rebuild Project Well I got it cleaned up a bit. The blades is in...damascus twist pattern in 1095 $ 15N20 nickel carbon. I think I'm going with these scales which are a wicked fire like mammoth tooth.

07-28-2009, 04:49 PM	#6
muskrat man filemaster Join Date: Oct 2006 Location: Ohio Posts: 1,305	Re: Buck 110 Custom Rebuild Project looking good, awsome tooth too

07-30-2009, 01:03 PM	#7
bLuEnOtE Straight Arrow Join Date: Jul 2005 Location: Land of Happy Cows Posts: 7,591	Re: Buck 110 Custom Rebuild Project That's gonna be purdy.. __________________ Mike. "Ignorance breeds monsters to fill up the vacancies of the soul that are unoccupied by the verities of knowledge." Horace Mann

08-27-2009, 01:39 PM	#8
maxcutter03 Pudin's side kick Join Date: Dec 2007 Location: North of DJ 3" down low Posts: 1,611	Re: Buck 110 Custom Rebuild Project hurry and finish, I want to see the finished action. __________________ Ye ole Coon Ass knife grind'n BASTD (CLB O’ TRU BSTDS) KF5ASI Form, function with a sharp edge. www.maxcutterknives.com

04-13-2010, 04:22 AM	#9
wayne_l Ramanon ownz me and I need a custom title Join Date: Sep 2007 Location: Meadow Lakes Alaska Posts: 1,022	Re: Buck 110 Custom Rebuild Project any finished pics of this knife since it was brought back from the dead ? __________________ Recession is when your neighbor loses his job Depression is when you lose yours Recovery is when Obama loses his TED

04-19-2010, 06:47 AM	#11
rio Keeper of the Pearly Gates Join Date: Oct 2006 Location: look @ my bio Posts: 15,335	Re: Buck 110 Custom Rebuild Project welcome to ramanon marry __________________ bastid for all occasions -------------------------------------------------------------------------------- if you ever need a room and don't want to be in nyc try this place is awesome.45 minutes away from nyc. http://alexanderhamiltonhouse.com/

04-19-2010, 06:48 AM	#12
rio Keeper of the Pearly Gates Join Date: Oct 2006 Location: look @ my bio Posts: 15,335	Re: Buck 110 Custom Rebuild Project can't wait to see it done skulls __________________ bastid for all occasions -------------------------------------------------------------------------------- if you ever need a room and don't want to be in nyc try this place is awesome.45 minutes away from nyc. http://alexanderhamiltonhouse.com/

05-01-2010, 09:13 PM	#15
seaplane Smart AND Good Looking! Join Date: May 2006 Posts: 66	Re: Buck 110 Custom Rebuild Project I've been looking at possibly trying to do this . I am looking forward to seeing the finnished knife and getting your opinions on re-assembling the 110. It would be great if you could give your opinion on how well the blade fit and what tweaks you had to do to it to get a good fit up! __________________ "Lifes been good to me so far"!

05-04-2010, 11:39 AM	#16
BSharp Neophyte Join Date: Mar 2010 Posts: 11	Re: Buck 110 Custom Rebuild Project Looks like it's going to be pretty cool. Can't wait to see the finished version. __________________ Camping Knives

06-01-2010, 07:29 AM	#17
williamsmith Rides on the little bus Join Date: Jun 2010 Posts: 1	Re: Buck 110 Custom Rebuild Project its really Amazing and sounds good to me a lot. __________________ williamsmith

06-09-2010, 11:22 AM	#18
maxcutter03 Pudin's side kick Join Date: Dec 2007 Location: North of DJ 3" down low Posts: 1,611	Re: Buck 110 Custom Rebuild Project Where's the knife?? __________________ Ye ole Coon Ass knife grind'n BASTD (CLB O’ TRU BSTDS) KF5ASI Form, function with a sharp edge. www.maxcutterknives.com

07-30-2010, 06:30 AM	#19
Dirk_McStabbins Smart! Join Date: Feb 2010 Posts: 37	Re: Buck 110 Custom Rebuild Project Should be a very nice knife.

08-15-2010, 09:50 PM	#20
maxcutter03 Pudin's side kick Join Date: Dec 2007 Location: North of DJ 3" down low Posts: 1,611	Re: Buck 110 Custom Rebuild Project It's been over a year........Where is the finished knife?? __________________ Ye ole Coon Ass knife grind'n BASTD (CLB O’ TRU BSTDS) KF5ASI Form, function with a sharp edge. www.maxcutterknives.com

08-19-2010, 04:57 PM	#21
Skullworks Spammer Royale with cheese Join Date: Feb 2008 Posts: 783	Re: Buck 110 Custom Rebuild Project I know...I know!

08-28-2010, 09:01 PM	#25
maxcutter03 Pudin's side kick Join Date: Dec 2007 Location: North of DJ 3" down low Posts: 1,611	Re: Buck 110 Custom Rebuild Project Tease!!!!!!!!!! __________________ Ye ole Coon Ass knife grind'n BASTD (CLB O’ TRU BSTDS) KF5ASI Form, function with a sharp edge. www.maxcutterknives.com

08-28-2010, 09:12 PM	#26
rio Keeper of the Pearly Gates Join Date: Oct 2006 Location: look @ my bio Posts: 15,335	Re: Buck 110 Custom Rebuild Project i request this one them __________________ bastid for all occasions -------------------------------------------------------------------------------- if you ever need a room and don't want to be in nyc try this place is awesome.45 minutes away from nyc. http://alexanderhamiltonhouse.com/

08-29-2010, 06:46 PM	#28
Skullworks Spammer Royale with cheese Join Date: Feb 2008 Posts: 783	Re: Buck 110 Custom Rebuild Project Alright. I got jiggy with it today! Getting the pins compressed and not getting the blade too tight was a bit of a trial and error. Shaped the scales roughly...still a little fine fitting to be done. Gonna do just epoxy to hold the scales on. A little relief in the liner to allow for the spring pivot pin. Gonna epoxy it up and finish her up.

08-30-2010, 05:05 AM	#29
Skullworks Spammer Royale with cheese Join Date: Feb 2008 Posts: 783	Re: Buck 110 Custom Rebuild Project ttt

08-30-2010, 08:12 AM	#30
Dirk_McStabbins Smart! Join Date: Feb 2010 Posts: 37	Re: Buck 110 Custom Rebuild Project Looking good

08-30-2010, 06:45 PM	#31
Skullworks Spammer Royale with cheese Join Date: Feb 2008 Posts: 783	Re: Buck 110 Custom Rebuild Project Okay guys! You hound me and then no response???

09-04-2010, 04:42 PM	#32
Skullworks Spammer Royale with cheese Join Date: Feb 2008 Posts: 783	Re: Buck 110 Custom Rebuild Project Finished! My final thoughts: Don't buy a cheap worn out 110 for the project. The locking spring will be worn out and you'll have to buy several to find a good one. Go ahead and buy a better starting knife. Make sure to keep the spacer/washer from the old blade that goes in the pivot hole of the blade. Do as much of your finishing and fitting before you reassemble the knife. It saves on getting lots of grit in the action from sanding. Tough for me to get the correct compression on the pins to make everything tight and fit nice without making the action tough to work. Lots of WD40 helps loosen it up. Give it a try...sure does create a unique knife!

09-04-2010, 07:35 PM	#33
forgedintime Hi Polished Join Date: Aug 2010 Location: Minnesota Posts: 93	Re: Buck 110 Custom Rebuild Project Beautiful finished knife. I bet it will cut a helluva lot better then the original blade too. Nice work! __________________ Forged in Time - Knives for all time.. Ye Fu**'n Scrrls Bstd (CLB O’ TRU BSTDS)

09-04-2010, 11:24 PM	#34
Maine1 Not just here for Hot Babes© Join Date: Dec 2009 Posts: 28	Re: Buck 110 Custom Rebuild Project Nice work! looks great.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode